How to distinguish product configurations of winding and binding machines

The steps of the winding and binding machine are divided into three simple steps: winding, taking and binding. Part of the winding focuses on the winding motor. At present, on the market, there are stepping motors and servo motors for manipulation. Compared with the servo motor, the AC servo motor has higher torque. When it works with high toughness, the advantages of the AC servo motor will be very obvious, and the greater the output power, the better the actual effect.
Part of the line taking is carried out by left and right line taking and translation transformation. The common take-up depends on the cylinder to achieve the effect. The better the cylinder quality is, the more durable it will be and the higher the reliability of the equipment will be. In the current sales market, generic winding and binding machines are not easy to cause common equipment failures due to product quality problems. Therefore, it is proposed to use well-known Chinese brands of winding and binding machines in key locations.
In today's wire winding and binding machines, some manufacturers also use cylinders for translation and transformation. Compared with the motor translation and transformation, the cylinder translation and transformation are not smooth enough, and the translation and transformation are not very accurate. The vibration in the whole operation process is great, and the damage to other components caused by the vibration is also great, so the equipment is not durable; The motor is controlled by a single pulse, moving accurately, and vibration will be less, just to get rid of this problem. The winding and binding machine consists of a motor and a synchronous wheel, which can make the winding and binding machine stable and straight, so as to ensure the actual effect of the binding.
1. Touch screen of winding and binding machine
It is used for main parameter setting, monitoring screen and alarm reminder.
2. Main power switch of winding and binding machine
The switching power switch on the electrical control cabinet can power on or off the machine equipment.
3. Emergency stop button of winding and binding machine
In case of emergency, press this button to stop the machine.
4. Operation key of winding and binding machine
Put the wire in the slot of the card, press and hold the operation button, and the device starts to work.
5. Calibration key of winding and binding machine
Restart the machine and equipment after finding any abnormality, or if the winding motor and the take-up arm do not have the original position, press this button to return the machine and equipment to the original state.
6. Test button of winding and binding machine
In the standby state of machines and equipment, this function key can detect the reliability of the band feeding organization, which is conducive to adjustment.